Every fire, electrical and security system in your building — from one accredited contractor.
Prime Fire Safety is a North London contractor with three divisions under one roof — Fire, Electrical and Security. We design, install, certify and maintain — direct for housing associations, councils and managing agents, and as the fire, electrical and security package for main contractors, M&E firms and developers. BAFE, NICEIC, SSAIB and FIA accredited, with £5m professional indemnity behind the design.
Three divisions — Electrical, Fire and Security systems — under one roof.
Each division is certificated by the scheme that governs it and staffed by our own engineers — so one company designs it, installs it and signs it off.
Electrical
NICEIC Approved ContractorBS 7671 · 18th Edition- EICR and fixed wire testing
- Full and partial rewires
- Consumer unit upgrades
- New installations, additions and EV points
- Commercial and development installation
Fire
BAFE Registered · FIA MemberBS 5839 · BS 5266 · BS 5306- Fire alarm systems, design to certification
- Fire alarm servicing, six-monthly and annual
- Emergency lighting
- Extinguishers, survey and service
- AOV, smoke control, EVCS and refuge
Security systems
Installed to the specification for the buildingBS 7273-4 fire interface- Access control and door entry
- CCTV, IP and analogue
- Video entry for residential blocks
- Intruder alarms
- Interfaced to the fire system, proven on test
Who we work for.
Almost all of our work comes from six kinds of client. Press whichever one you sit in and it sets out what we take on, how the job is run and what reaches your desk afterwards.
Recent work, and what is running now.
What these jobs have in common
Almost everything we do is in buildings that stay occupied while we are in them — housing association and council blocks, retirement schemes, listed conversions and permitted developments. Across the schemes on this page we have replaced fire alarm systems in twelve occupied retirement buildings, wired 117 flats from the intake to the final circuit, and installed detection, emergency lighting, CCTV, door entry and intruder alarms into live residential blocks in London, East and West Sussex, Bedfordshire, Kent and the North East.
The scale runs from a single riser to a borough-wide EICR and remedial programme. Every system is designed, installed, commissioned and certificated by our own engineers to BS 5839, BS 5266 and BS 7671 — one company on the certificate, whichever of the three divisions the work sits in.
Constructionline Gold member
Registration 1421029
Maintenance contracts for fire, electrical and security systems.
Every system in a building has a servicing interval set by its own standard, and a certificate that has to exist when someone asks for it. A contract puts all of them on one schedule and agrees the rates for any remedial work before it is needed. Where we take over an existing building, the first job is an equipment and asset list, carried out on our first service — every panel, detector, emergency light, camera and door controller recorded.
Servicing and testing
Each system is serviced at the interval its own standard sets, and a certificate is issued at every visit. We hold the dates and attend on schedule, so nothing lapses and the paperwork exists when an insurer, a fire officer or an auditor asks for it. Twelve, twenty-four or thirty-six month terms.
- Fire alarm to BS 5839-1:2025 — twice a year
- Emergency lighting to BS 5266-1 — twice a year
- AOV and smoke control to BS EN 12101 — annually
- Fire extinguishers to BS 5306-3 — annually
- Intruder, CCTV, access control and door entry
- Fixed wire testing and EICR to BS 7671
Callouts and remedials
Systems fail between visits. We attend under the same agreement, with the hourly, out-of-hours and callout rates set when you sign — so putting something right starts with an engineer rather than a new quotation.
- Response times written into the agreement
- Hourly, out-of-hours, weekend and callout rates fixed up front
- Our own engineers across fire, electrical and security
- Certificate and jobsheet on every attendance
- Every visit logged, and produced whenever you ask
Everything you need to set us up as a supplier.
Six third-party accreditations, all independently audited, alongside the insurance, RAMS and references a works coordinator, managing agent or principal contractor needs before we are allowed on site. Ask for the pack and we will send it over, or call and we will talk it through.
Registered in England & Wales, No. 13494204. North London office with dedicated account support.
Pre-qualified for public sector and housing frameworks. Certificate numbers supplied on request.
Every engineer DBS checked, 18th Edition and Testing & Inspection qualified, FIA trained on fire systems, and working-at-height and access qualified through PASMA and IPAF. Engineers who do not already hold an ECS card are put through it.
Public, products and professional indemnity at £5m each, employers' liability £10m, legal expenses included. Verification letter on request.
Housing associations, a London borough framework, and multiple developments and commercial projects. Client references supplied at tender.
Site-specific RAMS before we start, a certificate on every visit, and full handover documentation on completion.
Tell us about the building. We'll tell you what it needs.
Call, email, or visit the North London office. Dedicated account support, a fleet of service vans and in-house engineers ready to mobilise.
49a Oxford Road, London N4 3EY
- We read it and come back to you with questions or a price
- A site visit where the building needs one
- An itemised written quotation, priced line by line